TS-E2iplayer-2020.05.06.03
Maintainer:@freddy88
!!! Delete old version before !!!
@freddy88 wrote:
This version contains the one I created myself
Dependency folder iptvplayer_rootfs (PyCurl and FFmpeg) has been fixed
and the hosts xxx and tsiplayer and the host Hdfilme.Tv
And was corrected by me from hdfilme.net to hdfilme.cc to hdfilme.cx
There was also the folder content iptvplayer_rootfs (dependency folder PyCurl - FFmpeg) the old files with the newest files from me. replaced and thus updated.
Change fixed:
All following binary files are now always in path usr / bin /
cmdwrap, duk, e2ibox, exteplayer3, f4mdump, ffmpeg, fullwget, gstplayer, hlsdl, rtmpdump, uchardet, wget
and the gstreamer-1.0 is in /usr/lib/gstreamer-1.0
and PyCurl-FFmpeg in iptvplayer_rootfs folder in the root directory
Simply enter the following using the Telnet command and confirm with Enter at the end. For complete deletion without the file in the tmp root directory and for installation, the file must first be in the tmp root directory.
All old remnants Old files from Iptvplayer, Tsiplayer, E2istream, E2iplayer and my created player Ts-E2iplayer (maxbambi Zadmario and so on, is included) will be completely deleted.
If you don't want to have the grouping of TS-E2iplayer (it will become the old grouping again
I think my grouping is best suited for the version of T2-E2iplayer that is mine. Is from Tsiplayer.
Simply delete with Telnet with the Putty program
Quote:
rm -rf /etc/enigma2/iptvplayerarabicgroup.json
rm -rf /etc/enigma2/iptvplayerfrenchgroup.json
rm -rf /etc/enigma2/iptvplayerhostsgroups.json
rm -rf / etc / enigma2 / iptvplayerhostsorder
rm -rf /etc/tsiplayer_xtream.conf
Info:
With the following Telnet command everything is deleted from the player (see above) and then and finally the Ts-E2iplayer is installed by itself. (these scrips are final version) device then reboots. And my player can be seen in the extensions. You don't have to install binary files:
This message does not come at all (and if you do, press ok once and all dependencies are already available in my version.
Information:
E2iplayer needs further manipulations.
How to download and install additional binaries
Press Ok to start.
All binary files are already installed with my version
Simply copy the file TS-E2iplayer-2020.05.06.03.tar.gz with Ftp Tool such as FileZilla or Dreambox Control Center (DCC) into the root directory in the folder tmp of your device. FTP program and Telnet must remain open together (do not close )
Very important my scrips (Telnet commands only work with PuTTY and not at all with Dreambox Control Center. My script is just too long for DCC (too large)
Then execute the following Telnet command:
Quote:
init 4
rm -rf / usr / lib / enigma2 / python / Plugins / Extensions / IPTVPlayer
sed -i '/config.plugins.iptvplayer/d' / etc / enigma2 / settings
rm -rf / usr / lib / enigma2 / python / Plugins / Extensions / settloader
rm -rf /usr/lib/python2.7/site-packages/pycurl.so
rm -rf /usr/lib/gstreamer-1.0
rm -rf / hdd / IPTVCache
rm -rf / iptvplayer_rootfs
rm -rf /etc/enigma2/iptvplayerarabicgroup.json
rm -rf /etc/enigma2/iptvplayerfrenchgroup.json
rm -rf /etc/enigma2/iptvplayerhostsgroups.json
rm -rf / etc / enigma2 / iptvplayerhostsorder
rm -rf /etc/tsiplayer_xtream.conf
rm -rf / usr / bin / cmdwrap
rm -rf / usr / bin / duk
rm -rf / usr / bin / e2ibox
rm -rf / usr / bin / exteplayer3
rm -rf / usr / bin / f4mdump
rm -rf / usr / bin / fullwget
rm -rf / usr / bin / gstplayer
rm -rf / usr / bin / hlsdl
rm -rf / usr / bin / rtmpdump
rm -rf / usr / bin / uchardet
rm -rf usr / lib / enigma2 / python / Plugins / Extensions / IPTVPlayer / bin / cmdwrap
rm -rf usr / lib / enigma2 / python / Plugins / Extensions / IPTVPlayer / bin / duk
rm -rf usr / lib / enigma2 / python / Plugins / Extensions / IPTVPlayer / bin / hlsdl
tar -zxvf /tmp/TS-E2iplayer-2020.05.06.03.tar.gz -C /
rm -rf /tmp/TS-E2iplayer-2020.05.06.03.tar.gz
opkg update
opkg install exteplayer3
opkg install enigma2-plugin-systemplugins-serviceapp
sync
reboot
Info: Device restarts automatically after confirming this command with Enter.
Before starting e2iplayer, please check whether the number behind the entry for the service app
Exteplayer3 does not mean 68 but 50
50 must be there because at 68 there are movie films.
Hdfilme you have to watch a movie and pause then always rewind after a pause (2 sec or so) otherwise it hangs and the sound and image are then out of sync.
If you have made an update in open atv then always repeat the installation of my player so that the service app always says 50 and not 68.
If you want to keep all settings then you don't have to execute the sed command telnet sed -i '/config.plugins.iptvplayer/d' / etc / enigma2 / settings because if you do it it will always reset the player settings to the standard setting.
In general, I recommend that you always reset the settings with sed -i '/config.plugins.iptvplayer/d' / etc / enigma2 / settings on my installation because then it is completely newly installed with settings, and old settings do not bother.
Everything is set up again quickly, and when using the e2iplayer web interface it is easier to enter passwords or login data.
The following are my settings from etc - enigma2 - copied from settings
Quote:
config.plugins.iptvplayer.aac_software_decode = true
config.plugins.iptvplayer.ac3_software_decode = true
config.plugins.iptvplayer.alternativeARMV7MoviePla yer = exteplayer
config.plugins.iptvplayer.alternativeARMV7MoviePla yer0 = exteplayer
config.plugins.iptvplayer.autoCheckForUpdate = false
config.plugins.iptvplayer.autoplay_start_delay = 0
config.plugins.iptvplayer.buforowanie_m3u8 = false
config.plugins.iptvplayer.cmdwrappath = / usr / bin / cmdwrap
config.plugins.iptvplayer.dailymotion_localization = de_DE
config.plugins.iptvplayer.ddlme_lang = de
config.plugins.iptvplayer.defaultARMV7MoviePlayer = exteplayer
config.plugins.iptvplayer.defaultARMV7MoviePlayer0 = exteplayer
config.plugins.iptvplayer.deleteIcons = 0
config.plugins.iptvplayer.disable_live = true
config.plugins.iptvplayer.dts_software_decode = true
config.plugins.iptvplayer.dukpath = / usr / bin / duk
config.plugins.iptvplayer.eac3_software_decode = true
config.plugins.iptvplayer.exteplayer3path = / usr / bin / exteplayer3
config.plugins.iptvplayer.extplayer_summary = no
config.plugins.iptvplayer.f4mdumppath = / usr / bin / f4mdump
config.plugins.iptvplayer.gitlab_repo = maxbambi2
config.plugins.iptvplayer.gstplayerpath = / usr / bin / gstplayer
config.plugins.iptvplayer.hdfull_language = en
config.plugins.iptvplayer.hlsdlpath = / usr / bin / hlsdl
config.plugins.iptvplayer.hostipla = true
config.plugins.iptvplayer.IPTVWebIterface = true
config.plugins.iptvplayer.laola1tv_language = de
config.plugins.iptvplayer.movie4kto_language = de
config.plugins.iptvplayer.mp3_software_decode = true
config.plugins.iptvplayer.myjd_login =
config.plugins.iptvplayer.myjd_password =
config.plugins.iptvplayer.plarform = armv7
config.plugins.iptvplayer.possibleUpdateType = all
config.plugins.iptvplayer.preferredupdateserver = 2
config.plugins.iptvplayer.rtmpdumppath = / usr / bin / rtmpdump
config.plugins.iptvplayer.serienstreamto_login =
config.plugins.iptvplayer.serienstreamto_password =
config.plugins.iptvplayer.skylinewebcams_lang = de
config.plugins.iptvplayer.sportstream365_language = de
config.plugins.iptvplayer.uchardetpath = / usr / bin / uchardet
config.plugins.iptvplayer.usepycurl = true
config.plugins.iptvplayer.wgetpath = wget
config.plugins.iptvplayer.ZablokujWMV = false
http://wetektr.com/WeTek/index.php?d...5.06.03.tar.gz
Maintainer:@freddy88
!!! Delete old version before !!!
@freddy88 wrote:
This version contains the one I created myself
Dependency folder iptvplayer_rootfs (PyCurl and FFmpeg) has been fixed
and the hosts xxx and tsiplayer and the host Hdfilme.Tv
And was corrected by me from hdfilme.net to hdfilme.cc to hdfilme.cx
There was also the folder content iptvplayer_rootfs (dependency folder PyCurl - FFmpeg) the old files with the newest files from me. replaced and thus updated.
Change fixed:
All following binary files are now always in path usr / bin /
cmdwrap, duk, e2ibox, exteplayer3, f4mdump, ffmpeg, fullwget, gstplayer, hlsdl, rtmpdump, uchardet, wget
and the gstreamer-1.0 is in /usr/lib/gstreamer-1.0
and PyCurl-FFmpeg in iptvplayer_rootfs folder in the root directory
Simply enter the following using the Telnet command and confirm with Enter at the end. For complete deletion without the file in the tmp root directory and for installation, the file must first be in the tmp root directory.
All old remnants Old files from Iptvplayer, Tsiplayer, E2istream, E2iplayer and my created player Ts-E2iplayer (maxbambi Zadmario and so on, is included) will be completely deleted.
If you don't want to have the grouping of TS-E2iplayer (it will become the old grouping again
I think my grouping is best suited for the version of T2-E2iplayer that is mine. Is from Tsiplayer.
Simply delete with Telnet with the Putty program
Quote:
rm -rf /etc/enigma2/iptvplayerarabicgroup.json
rm -rf /etc/enigma2/iptvplayerfrenchgroup.json
rm -rf /etc/enigma2/iptvplayerhostsgroups.json
rm -rf / etc / enigma2 / iptvplayerhostsorder
rm -rf /etc/tsiplayer_xtream.conf
Info:
With the following Telnet command everything is deleted from the player (see above) and then and finally the Ts-E2iplayer is installed by itself. (these scrips are final version) device then reboots. And my player can be seen in the extensions. You don't have to install binary files:
This message does not come at all (and if you do, press ok once and all dependencies are already available in my version.
Information:
E2iplayer needs further manipulations.
How to download and install additional binaries
Press Ok to start.
All binary files are already installed with my version
Simply copy the file TS-E2iplayer-2020.05.06.03.tar.gz with Ftp Tool such as FileZilla or Dreambox Control Center (DCC) into the root directory in the folder tmp of your device. FTP program and Telnet must remain open together (do not close )
Very important my scrips (Telnet commands only work with PuTTY and not at all with Dreambox Control Center. My script is just too long for DCC (too large)
Then execute the following Telnet command:
Quote:
init 4
rm -rf / usr / lib / enigma2 / python / Plugins / Extensions / IPTVPlayer
sed -i '/config.plugins.iptvplayer/d' / etc / enigma2 / settings
rm -rf / usr / lib / enigma2 / python / Plugins / Extensions / settloader
rm -rf /usr/lib/python2.7/site-packages/pycurl.so
rm -rf /usr/lib/gstreamer-1.0
rm -rf / hdd / IPTVCache
rm -rf / iptvplayer_rootfs
rm -rf /etc/enigma2/iptvplayerarabicgroup.json
rm -rf /etc/enigma2/iptvplayerfrenchgroup.json
rm -rf /etc/enigma2/iptvplayerhostsgroups.json
rm -rf / etc / enigma2 / iptvplayerhostsorder
rm -rf /etc/tsiplayer_xtream.conf
rm -rf / usr / bin / cmdwrap
rm -rf / usr / bin / duk
rm -rf / usr / bin / e2ibox
rm -rf / usr / bin / exteplayer3
rm -rf / usr / bin / f4mdump
rm -rf / usr / bin / fullwget
rm -rf / usr / bin / gstplayer
rm -rf / usr / bin / hlsdl
rm -rf / usr / bin / rtmpdump
rm -rf / usr / bin / uchardet
rm -rf usr / lib / enigma2 / python / Plugins / Extensions / IPTVPlayer / bin / cmdwrap
rm -rf usr / lib / enigma2 / python / Plugins / Extensions / IPTVPlayer / bin / duk
rm -rf usr / lib / enigma2 / python / Plugins / Extensions / IPTVPlayer / bin / hlsdl
tar -zxvf /tmp/TS-E2iplayer-2020.05.06.03.tar.gz -C /
rm -rf /tmp/TS-E2iplayer-2020.05.06.03.tar.gz
opkg update
opkg install exteplayer3
opkg install enigma2-plugin-systemplugins-serviceapp
sync
reboot
Info: Device restarts automatically after confirming this command with Enter.
Before starting e2iplayer, please check whether the number behind the entry for the service app
Exteplayer3 does not mean 68 but 50
50 must be there because at 68 there are movie films.
Hdfilme you have to watch a movie and pause then always rewind after a pause (2 sec or so) otherwise it hangs and the sound and image are then out of sync.
If you have made an update in open atv then always repeat the installation of my player so that the service app always says 50 and not 68.
If you want to keep all settings then you don't have to execute the sed command telnet sed -i '/config.plugins.iptvplayer/d' / etc / enigma2 / settings because if you do it it will always reset the player settings to the standard setting.
In general, I recommend that you always reset the settings with sed -i '/config.plugins.iptvplayer/d' / etc / enigma2 / settings on my installation because then it is completely newly installed with settings, and old settings do not bother.
Everything is set up again quickly, and when using the e2iplayer web interface it is easier to enter passwords or login data.
The following are my settings from etc - enigma2 - copied from settings
Quote:
config.plugins.iptvplayer.aac_software_decode = true
config.plugins.iptvplayer.ac3_software_decode = true
config.plugins.iptvplayer.alternativeARMV7MoviePla yer = exteplayer
config.plugins.iptvplayer.alternativeARMV7MoviePla yer0 = exteplayer
config.plugins.iptvplayer.autoCheckForUpdate = false
config.plugins.iptvplayer.autoplay_start_delay = 0
config.plugins.iptvplayer.buforowanie_m3u8 = false
config.plugins.iptvplayer.cmdwrappath = / usr / bin / cmdwrap
config.plugins.iptvplayer.dailymotion_localization = de_DE
config.plugins.iptvplayer.ddlme_lang = de
config.plugins.iptvplayer.defaultARMV7MoviePlayer = exteplayer
config.plugins.iptvplayer.defaultARMV7MoviePlayer0 = exteplayer
config.plugins.iptvplayer.deleteIcons = 0
config.plugins.iptvplayer.disable_live = true
config.plugins.iptvplayer.dts_software_decode = true
config.plugins.iptvplayer.dukpath = / usr / bin / duk
config.plugins.iptvplayer.eac3_software_decode = true
config.plugins.iptvplayer.exteplayer3path = / usr / bin / exteplayer3
config.plugins.iptvplayer.extplayer_summary = no
config.plugins.iptvplayer.f4mdumppath = / usr / bin / f4mdump
config.plugins.iptvplayer.gitlab_repo = maxbambi2
config.plugins.iptvplayer.gstplayerpath = / usr / bin / gstplayer
config.plugins.iptvplayer.hdfull_language = en
config.plugins.iptvplayer.hlsdlpath = / usr / bin / hlsdl
config.plugins.iptvplayer.hostipla = true
config.plugins.iptvplayer.IPTVWebIterface = true
config.plugins.iptvplayer.laola1tv_language = de
config.plugins.iptvplayer.movie4kto_language = de
config.plugins.iptvplayer.mp3_software_decode = true
config.plugins.iptvplayer.myjd_login =
config.plugins.iptvplayer.myjd_password =
config.plugins.iptvplayer.plarform = armv7
config.plugins.iptvplayer.possibleUpdateType = all
config.plugins.iptvplayer.preferredupdateserver = 2
config.plugins.iptvplayer.rtmpdumppath = / usr / bin / rtmpdump
config.plugins.iptvplayer.serienstreamto_login =
config.plugins.iptvplayer.serienstreamto_password =
config.plugins.iptvplayer.skylinewebcams_lang = de
config.plugins.iptvplayer.sportstream365_language = de
config.plugins.iptvplayer.uchardetpath = / usr / bin / uchardet
config.plugins.iptvplayer.usepycurl = true
config.plugins.iptvplayer.wgetpath = wget
config.plugins.iptvplayer.ZablokujWMV = false
http://wetektr.com/WeTek/index.php?d...5.06.03.tar.gz