Ncam 12.4 Latest

[mach1]

Ncam 8.8

-Improvements emu
-clean implementation of the card list
-(rarely used modules are set from default on to default off (no codechange just setup switch))
-fix reset to wrong defaults
-[nemu] Changed function declaration to a more clean way
-[streamserver] Improved Compel algorithm
(Picture is more stable now with minimum glitches only at key change (every ~53 seconds). The teletext pid is also descrambled now)

File Type: zip Ncam-Images-MIPS-IPK.zip (2.02 MB, 40 views)

http://wetektr.com/WeTek/index.php?d...m8.8&s=n&o=asc

[mach1]

Config files
http://wetektr.com/WeTek/index.php?d...21-02-2019.zip

[mach1]

Ncam 9.0 compiled and patched by marouan & READ


-[powervu] Added support for hash mode 30
-insert hd03 and hd04 atr
-[dvbapi + powervu] Properly set the descrambler mode for CSA
(When watching a DES powervu channel, switching back to CSA channels required a reboot on some receivers. Other more resilient receivers just threw an error(ioctl(CA_SET_DESCR_MODE): Invalid argument), but continued to work. This was described as a bug of these receivers, but in fact it was a bug of oscam-emu. The correct mode for the CSA algorithm is CBC and not ECB! Thanks to all who helped)
Attached Files
File Type: zip Ncam-Images-MIPS-IPK.zip (2.08 MB, 9 views)



http://wetektr.com/WeTek/index.php?d...m9.0&s=n&o=asc

[mach1]

Ncam 9.1

Changelog:
-Improvement the emu
-[nemu] Fixed potential deadlock in powervu emm handling
(When the key DB contains no powervu keys, the powervu_get_hexserials() retuns 0 and the mutex in emu_get_pvu_emm_filter() is not released)

http://wetektr.com/WeTek/index.php?d...m9.1&s=n&o=asc

[mach1]

Ncam 9.2 compiled and patched by marouan & READ

-Improvement the emu
-Fixes detecte reader and file-keys of constant.cw
-[powervu] Added support for various hash modes (This includes hash modes 0, 0x0B, 0x0C, 0x0D, 0x0E and greater than 0x27)


http://wetektr.com/WeTek/index.php?d...m9.2&s=n&o=asc

[mach1]

Ncam 9.3 compiled and patched by marouan & READ

-[powervu] Added support for hash mode 31

http://wetektr.com/WeTek/index.php?d...m9.3&s=n&o=asc

Changeset 11505 with emu for PowerVu fix

[mach1]

Ncam 9.4 compiled and patched by marouan & RAED




-[ncam] Better solution for setting CBC mode for CSA
(Instead of hard coding the algo mode in the dvbapi_write_cw(), we now initialize the er->cw_ex variable with the proper value)
-Simpler code for the EXTENDED_CW struct
-[ncam] Renamed caid_is_biss_static() to caid_is_biss_fixed()


http://wetektr.com/WeTek/index.php?d...m9.4&s=n&o=asc

[mach1]

Ncam 9.5 New Fix compiled and patched by marouan & RAED


-[powervu] Added support for hash mode 32
-[director] Fixed cw checksum bytes for nano EE
-[DVBAPI] 128 bit keys

http://wetektr.com/WeTek/index.php?d...m9.5&s=n&o=asc

[mach1]

Ncam 9.6 compiled and patched by marouan & READ

-[powervu] Added support for modeCW 4 and modeUnmask 4


http://wetektr.com/WeTek/index.php?d...m9.6&s=n&o=asc

[mach1]

Ncam v 9.7



-Rework on dvbapi to incrase the amount of descramblers
-Support for DVB-CISSA scrambling algorithm and 16 byte CWs

Get available descramblers in box and BISS2 related changes

* Instead of using a predefined number of descramblers (16 until now), oscam now gets the exact number of available descramblers in box.
* Skip cw checks for BISS2, similar to what is done for BISS1. BISS2 uses 16 byte cw, so some checks need to be skipped.
* Cosmetic changes including code refactoring, variable renaming and comment addition to

http://wetektr.com/WeTek/index.php?d...m9.7&s=n&o=asc

[mach1]

Ncam 9.8 compiled and patched by marouan & READ

-Add support dvbcissa-biss2
-Increased max demux to 32 and max filters to 64
-Decreased max ecm pids to 16 and emm pids to 16
-Decreased max stream indices to 8
-[dvbapi] Increased MAX_STREAM_INDICES back to 32
(It should be equal to MAX_STREAM_PIDS or else it creates problems with specific powervu channels. A better solution (with will also result in even lower number of descramblers needed for powervu channels) will be added in the future)
-[nemu] Dropped drecrypt & videoguard module
(No channel uses it anymore)
-fix bug in disablecrccws_only_for

http://wetektr.com/WeTek/index.php?d...m9.8&s=n&o=asc

[mach1]

Ncam.config Files

24.04.2019 @fairman

http://wetektr.com/WeTek/index.php?d...m9.8&s=n&o=asc

[mach1]

Ncam.config Files

26.04.2019
Fixes for SkyDE

http://wetektr.com/WeTek/index.php?d...m9.8&s=n&o=asc

[mach1]

Ncam 10.0 compiled and patched by marouan & READ

-[streamserver + powervu] Use the new key method here as well
(We can get the tsid, onid and ens values from the service reference, so this is possible after all)
-Cosmetics to log messages


http://wetektr.com/WeTek/index.php?d...10.0&s=n&o=asc

[mach1]

Ncam 10.1 compiled and patched by marouan & READ

-[biss] Increased variable size to avoid potential overflow
-[viaccess] Fixed CW checksum bytes for viaccess 2
-Added support for a higher number of demux devices in CA PMT
(Modern enigma2 boxes with FCB tuners can have many demux devices,
so a new CA PMT descriptor that allows up to 128 demuxes (descriptor tag 0x86) is now supported.
Also, the get_demux_options() function is completely re-written,
so it doesn't care for the order of descriptors inside the CA PMT message)



http://wetektr.com/WeTek/index.php?d...10.1&s=n&o=asc