Tweet
Perfect-Privacy Manager
[Plugin] Perfect-Privacy Manager
Perfect-Privacy Manager
I have created a plugin for the OpenVPN provider Perfect-Privacy, so you do not have to adjust the configs yourself or swap them over FTP.
To use the plugin, you have to have an Acc in Perfect-Privacy.
This is a hobby project, I'm not a programmer so it can sometimes come to problems.
Functions that can be configured in the menu:
- OpenVPN autostart
- Default DNS server
Are automatically backed up, but can be adjusted in the menu and also set
- Perfect-Privacy DNS Server can be chosen freely (optional)
A resolv-update-conf is included in the plugin, it will always use the Perfect-Privacy DNS server.
- Cascaded connection up to 2 Hop's
Even after a restart, a Cascadierte connection is established.
- IPtables can also be activated (unfortunately not in all boxes because kernel-module-xt-multiport and kernel-module-xt-conntrack are missing)
Iptables, kernel-module-xt-multiport and kernel-module-xt-conntrack will not be installed until you enable IPtables in the menu.
If the packages can not be installed, you will get an error message which could not be installed.
- Config's TCP or UDP and AES-256-CBC or AES-128-CBC
Before the first start of the plugin, please stop OpenVPN so that the correct default DNS servers are backed up.
Every time you quit the menu, you'll always be asked if you want to load new configs.
So after reinstalling or update you must first load the config's.
Notes on the OE2.0 version:
- Image tested were OpenATV, BlackHole and VTI on Vu Solo Se, Uno 4k, Uno 4k Se, Solo 4k, Zero 4k
- With VTI the autostart of the Cascade does not work, that is because the box starts at boot in the year 1970
Therefore, the restart is delayed by 20 sec.
It will then build a Normal OpenVPN connection with Hop 1.
Notes on the OE2.5 version:
- Tested Image Original Unstable, Merlin, Newnigma2 and Oozoon on a DM9x0, 820 and 7080
- When installing the plugin, a start script is adapted by connman, so that the DNS Proxy is disabled.
Otherwise the DNS servers of Perfect Privacy can not be used.
- After uninstalling the plugin a reboot of the box must be made so that the DNS proxy is activated again.
- With newnigma2 the Cascade does not work, with all other image which I tested myself works the Cascade
- IPtables worked on all image
- After the installation Please make a restart of the box, Gui restart is not enough, then only the plugin can be used
Please do not activate everything after the first installation, just enter the access data once and load the config's.
If then an OpenVPN connection exists you can test the remaining functions.
Update 1.2.7
- Config Downloader Fix
http://wetektr.com/WeTek/index.php?d....7_all.ipk.zip
Perfect-Privacy Manager
I have created a plugin for the OpenVPN provider Perfect-Privacy, so you do not have to adjust the configs yourself or swap them over FTP.
To use the plugin, you have to have an Acc in Perfect-Privacy.
This is a hobby project, I'm not a programmer so it can sometimes come to problems.
Functions that can be configured in the menu:
- OpenVPN autostart
- Default DNS server
Are automatically backed up, but can be adjusted in the menu and also set
- Perfect-Privacy DNS Server can be chosen freely (optional)
A resolv-update-conf is included in the plugin, it will always use the Perfect-Privacy DNS server.
- Cascaded connection up to 2 Hop's
Even after a restart, a Cascadierte connection is established.
- IPtables can also be activated (unfortunately not in all boxes because kernel-module-xt-multiport and kernel-module-xt-conntrack are missing)
Iptables, kernel-module-xt-multiport and kernel-module-xt-conntrack will not be installed until you enable IPtables in the menu.
If the packages can not be installed, you will get an error message which could not be installed.
- Config's TCP or UDP and AES-256-CBC or AES-128-CBC
Before the first start of the plugin, please stop OpenVPN so that the correct default DNS servers are backed up.
Every time you quit the menu, you'll always be asked if you want to load new configs.
So after reinstalling or update you must first load the config's.
Notes on the OE2.0 version:
- Image tested were OpenATV, BlackHole and VTI on Vu Solo Se, Uno 4k, Uno 4k Se, Solo 4k, Zero 4k
- With VTI the autostart of the Cascade does not work, that is because the box starts at boot in the year 1970
Therefore, the restart is delayed by 20 sec.
It will then build a Normal OpenVPN connection with Hop 1.
Notes on the OE2.5 version:
- Tested Image Original Unstable, Merlin, Newnigma2 and Oozoon on a DM9x0, 820 and 7080
- When installing the plugin, a start script is adapted by connman, so that the DNS Proxy is disabled.
Otherwise the DNS servers of Perfect Privacy can not be used.
- After uninstalling the plugin a reboot of the box must be made so that the DNS proxy is activated again.
- With newnigma2 the Cascade does not work, with all other image which I tested myself works the Cascade
- IPtables worked on all image
- After the installation Please make a restart of the box, Gui restart is not enough, then only the plugin can be used
Please do not activate everything after the first installation, just enter the access data once and load the config's.
If then an OpenVPN connection exists you can test the remaining functions.
Update 1.2.7
- Config Downloader Fix
http://wetektr.com/WeTek/index.php?d....7_all.ipk.zip
Yorum yap