Predator 3.24

Programming:
See "howto.txt" for instructions

About this version:
For Dragon Module.

Emulation for Irdeto, Nagra, Viaccess, Viaccess2, Seca and Conax , with keyeditor
(check out the "Debug" option in the menu).
Nagra AU

New:
TPSCrypt AES *** is now editable.
In debug menu, go to Viyuckses, Viyuckses1, then 55aeae-TPS AES.
Select key0x08-key0x09, and put the AES *** in *** 08-0 and *** 08-1.
Provided AES *** was working 18/11.


NOTE:
A cam has to register the crypto ids it can handle with the receiver.
The standard does not limit the number of crypto ids sent by the cam; however,
in practice many receivers start behaving really weird when the cam sends more than 16.
Unfortunately, this is all done at startup, the cam can not later on change its mind and
register other ids.
For this reason some more obscure IDS have been removed to make room.

HOWEVER, the crypto ids registered by the cam are editable in the binary file.
At position 0x26B0 you will find them, structure is:
- 1 byte, number of CA IDS to register with the receiver.
- 1 byte value 00, do not change.
Then, the CA IDS, 2 byte each, big-endian.
There is room for 31 ids if you want to try if your receiver can handle more than 16.
Don't forget to change the first byte if you add or remove ids.
If you just change existing ids, there is no need to change the first bye.

Just in case you are unsure if you have the right file position:
in this distribution the CA ID structure is
10 -> number of ids, HEXADECIMAL remember....
00 -> Always 00 do not touch
01 00 05 00 17 02 0B 00 4A 70 06 04 06 02 06 22 -> the ca ids
17 62 18 00 06 06 0D 03 0D 00 09 61 09 0F 09 19
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00




Always check files with DCP first! Do not load files that did not come with
predator.IDs included!!

From this version on, the file "predator.ID" will be included. This file is
for use with the excellent "dcp" software from TuxInBox, and allows you to
check authentic firmware.

N.B.


P.S. All working great and load predator3.24 on Board ;)
I not post link because i not break RULES ;)

Abisi öncelikle hoş geldiniz!..

Dosya nerede?

:) Here is the file Predator 3.24 testet and works OK :)

eline saglık arkadaşım.

arkadaşlar yazılımı yükledim ama neyazıkki multiler bende çalışmadı diyerleri hepsi ok nedendir acaba saygılar............

:) Updated all **** for all providers feel free to update this file to your CAM.. and now you can manually enter with remote new AES TPS ****... just follow the instructions in readme...
ENJOY! :) :)